LPDDR2 SDRAM- Integrated Silicon Solution Inc.
Scroll to Top

LPDDR2 SDRAM

  • Low-voltage supplies: 1.8V, 1.2V
  • Clock Frequency Range :  10MHz to 533MHz
    - Data rates from : 20Mbps to 1066 Mbps per I/O
  • Four-bit Pre-fetch DDR Architecture
  • Multiplexed, double data rate, command/address inputs
  • ZQ Calibration
  • Mobile features for lower power
  • Long-term support

PowerSaver™ LPDDR2 SDRAM

Den Org Type Part Number Buy Vcc Refsh Speed(Mhz) Pkg(Pins) Status Models Comment/ Previous Rev.
256M 16Mx16 LPDDR2 IS43LD16160B,
IS46LD16160B
1.2/1.8V 4K 533,400 BGA(134),PoP(168) Prod
  8Mx32 LPDDR2 IS43LD32800B,
IS46LD32800B
1.2/1.8V 4K 533,400 BGA(134),PoP(168) Prod
512M 32Mx16 LPDDR2 IS43LD16320A,
IS46LD16320A
1.2/1.8V 4K 533,400 BGA(134) Prod  
  16Mx32 LPDDR2 IS43LD32160A,
IS46LD32160A
1.2/1.8V 4K 533,400 BGA(134) Prod  
1G 64Mx16 LPDDR2 IS43LD16640C,
IS46LD16640C
1.2/1.8V 4K 533,400 BGA(134) Prod
  64Mx16 LPDDR2 IS43LD16640D,
IS46LD16640D
1.2/1.8V 4K 533,400 BGA(134) Prod
  32Mx32 LPDDR2 IS43LD32320C,
IS46LD32320C
1.2/1.8V 4K 533,400 BGA(134) Prod
  32Mx32 LPDDR2 IS43LD32320D,
IS46LD32320D
1.2/1.8V 4K 533,400 BGA(134) Prod
2G 128Mx16 LPDDR2 IS43LD16128C,
IS46LD16128C
1.2/1.8V 8K 533,400 BGA(134) Prod IS43/46LD16128B
  64Mx32 LPDDR2 IS43LD32640C,
IS46LD32640C
1.2/1.8V 8K 533,400 BGA(134) Prod IS43/46LD32640B
4G 256Mx16 LPDDR2 IS43LD16256C,
IS46LD16256C
1.2/1.8V 8K 533,400 BGA(134) S=NOW  
  128Mx32 LPDDR2 IS43LD32128B,
IS46LD32128B
1.2/1.8V 8K 533,400 BGA(134),PoP(168) Prod  
  128Mx32 LPDDR2 IS43LD32128C,
IS46LD32128C
1.2/1.8V 8K 533,400 BGA(134),PoP(168) Prod  
8G 256Mx32 LPDDR2 IS43LD32256A 1.2/1.8V 8K 533,400 BGA(134)    

Notes:

  • Simulation Models not listed above may be available upon request
  • S = Sample, Prod = Production
  • NR = Not Recommended for new designs
  • EOL = End of Life
  • IF YOU DON'T SEE A PRODUCT YOU ARE INTERESTED IN AND HAVE A SPECIAL REQUEST, CONTACT US AND LET US KNOW
  • Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that:
  • a. the risk of injury or damage has been minimized;
  • b. the user assume all such risks; and
  • c. potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances