Integrated Silicon Solution Inc. SRAM, DRAM, FLASH, ANALOG, KGD, WAFER
Scroll to Top

CellularRAM/Pseudo SRAM

  • 8Mb,16Mb, 32Mb, and 64Mb densities available
  • Asynchronous, Page, and Burst features supported
  • Low Power Features
  • Industrial and Automotive (-40 to 85°C) Temperature available

HyperRAM™

  • Reduced signal pin counts with 12-pin HyperBus™ Interface
  • 1.8V (166MHz) and 3.0V (100MHz)
  • DDR operation to achieve max throughput of 333MB/s
  • Industrial, Extended and Automotive
    (-40 to 105°C) Temperature available
  • 6mm x 8mm TFBGA Package








CellularRAM/Pseudo SRAM

Den Org Part Number Vcc Speed(ns) Pkg(Pins) Status Models Comment/Previous Rev.
8M 512Kx16 IS66/67WV51216EBLL 2.5-3.6V 70 TSOP2(44),mBGA(48) Prod
  512Kx16 IS66/67WVE51216EALL/EBLL/ECLL 1.7-1.95V/ 2.7-3.6V 70 TFBGA(48) Prod
16M 1Mx16 IS66/67WV1M16EBLL 1.7-1.95V 70 mBGA(48) Prod
  1Mx16 IS66/67WVC1M16EALL 1.7-1.95V 70 VFBGA(54) Prod CRAM 1.5
  1Mx16 IS66WVD1M16ALL 1.7-1.95V 70 VFBGA(54) Prod CRAM 2.0
  1Mx16 IS66/67WVE1M16EALL/EBLL/ECLL 1.7-1.95V/ 2.7-3.6V 70 TFBGA(48) Prod
32M 2Mx16 IS66/67WVC2M16EALL 1.7-1.95V 70 VFBGA(54) Prod
  2Mx16 IS66/67WVC2M16ECLL 1.7-1.95V 70 VFBGA(54) Prod
  2Mx16 IS66/67WVE2M16EALL/EBLL/ECLL 1.7-1.95V/ 2.7-3.6V 70 TFBGA(48) Prod
64M 4Mx16 IS66WVE4M16ALL 1.7-1.95V 70 TFBGA(48) Prod
  4Mx16 IS66WVC4M16ALL 1.7-1.95V 70 VFBGA(54) Prod
  4Mx16 IS66/67WVC4M16EALL 1.7-1.95V 70 VFBGA(54) Prod
  4Mx16 IS66/67WVC4M16ECLL 1.7-1.95V 70 VFBGA(54) Prod
  4Mx16 IS66WVD4M16ALL 1.7-1.95V 70 VFBGA(54) Prod
  4Mx16 IS66/67WVE4M16EALL/EBLL/ECLL 1.7-1.95V/ 2.7-3.6V 70 TFBGA(48) Prod
  4Mx16 IS66/67WVE4M16TALL/TBLL/TCLL 1.7-1.95V/ 2.7-3.6V 70 TFBGA(48) Prod

Notes:

  • Simulation Models not listed above may be available upon request
  • S = Sample, Prod = Production
  • NR = Not Recommended for new designs
  • EOL = End of Life
  • IF YOU DON'T SEE A PRODUCT YOU ARE INTERESTED IN AND HAVE A SPECIAL REQUEST, CONTACT US AND LET US KNOW
  • Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that:
  • a. the risk of injury or damage has been minimized;
  • b. the user assume all such risks; and
  • c. potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances