DDR2 SDRAM

 




1.8V DDR2 (Double Data Rate) Synchronous DRAM


Den Org Type Part No. Vcc Refsh Speed Pkg (#Pins) Status Models Comment

256M 32Mx8 DDR2 IS43DR83200A 1.8V 8K 800,667,533,400 BGA(60) S=Q4/10

Lead=free

                     
  16Mx16 DDR2 IS43DR16160A 1.8V 8K 800,667,533,400 WBGA(84) S=NOW IBIS

Lead-free

                     
  8Mx32 DDR2 IS43DR32800A 1.8V 4K 533,400 BGA(126) Prod IBIS

TechNote

Application Note

Lead-free

  DDR2 IS43DR32801A 1.8V 8K 533,400 BGA(126) Prod IBIS Lead-free, Reduced page option

512M 64Mx8 DDR2 IS43DR86400B 1.8V 8K 800,667,533 BGA(60) Prod IBIS

Lead-free

                   
  32Mx16 DDR2 IS43DR16320B 1.8V 8K 800,667,533 BGA(84) Prod IBIS

Lead-free


1G 128Mx8 DDR2 IS43DR81280A 1.8V 8K 800,667,533,400 BGA(60) Prod IBIS

Lead-free

                   
  64Mx16 DDR2 IS43DR16640A 1.8V 8K 800,667,533,400 BGA(84) Prod IBIS

Lead-free

Top of Page



1.8V DDR2 (Double Data Rate) Synchronous Automotive DRAM


Den Org Type Part No. Vcc Refsh Speed Pkg (#Pins) Status Models Comment

256M 16Mx16 DDR2 IS46DR16160A 1.8V 8K 533,400 WBGA(84) S=NOW IBIS

Lead=free

                     
8Mx32 DDR2 IS46DR32801A 1.8V 8K 400 BGA(126) S=NOW IBIS Lead-free

512M 64Mx8 DDR2 IS46DR86400B 1.8V 8K 667,533,400 BGA(60) S=NOW IBIS

Lead-free

                     
  32Mx16 DDR2 IS46DR16320B 1.8V 8K 667,533,400 BGA(84) S=NOW IBIS

Lead-free


1G 128Mx8 DDR2 IS46DR81280A 1.8V 8K 667,533,400 BGA(60) S=NOW IBIS

Lead-free

                     
  64Mx16 DDR2 IS46DR16640A 1.8V 8K 667,533,400 BGA(84) S=NOW IBIS

Lead-free

                   
Top of Page




NOTES:

  • Simulation Models not listed above may be available upon request
  • S = Sample, Prod = Production
  • NR = Not Recommended for new designs
  • EOL = End of Life
  • IF YOU DON'T SEE A PRODUCT YOU ARE INTERESTED IN AND HAVE A SPECIAL REQUEST,
    CONTACT US AND LET US KNOW
  • Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or
    malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety
    or effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written
    assurance to its satisfaction, that:
    a.) the risk of injury or damage has been minimized;
    b.) the user assume all such risks; and
    c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances

Top of Page

HOME | CONTACT US | SITE MAP

Contact Information
Integrated Silicon Solution, Inc.
1940 Zanker Road, San Jose, CA 95112-4216
Tel: (408) 969-6600 Fax: (408) 969-7800
Webmaster
© 2008 ISSI. All Rights Reserved.
Last Updated: 06/03/2008
An ISO 9001, 14001 Company
Disclosure
Caution Concerning Forward
Looking Statements
Site By JSDeBord, Inc.